Image
window condensation indicates energy efficiency

Exterior Condensation

Exterior condensation results from the same environmental conditions that cause dew to appear on grass or condensation or frost to appear on a car that is parked outside overnight. It forms when moist air comes into contact with cool surfaces such as glass. This can happen when a cool night follows a warmer day, typically during the spring and fall seasons. Condensation generally does not occur with less energy efficient windows, because heat from the warm interior of the home escapes through the window keeping the exterior temperature of the glass high enough to prevent condensation.

In contrast, energy efficient windows significantly reduce the interior heat conducted through the glass. This lowers the temperature of the outside glass, which at a certain dew point can result in condensation. Exterior condensation is actually an indication that the insulating glass in your windows is performing as it should, reducing heat loss and lowering utility costs. It is a result of the normal functioning of energy efficient windows.

Image
Ultra Series awning window

Interior Condensation

Condensation on interior surfaces of windows and doors occurs because of high humidity and low air exchange inside the home. In many older homes there were gaps in the windows where drafts could be felt and air would flow. This exchange of air, in many cases, was sufficient to prevent condensation from forming. The high-performance windows of today are designed to be air tight to reduce heat loss, which also reduces air flow. Three ways you can fight interior condensation are to reduce moisture sources (humidifiers, plants, aquariums, etc.); increase ventilation (open windows for a few minutes each day, especially during steam-producing activities such as showering, laundry and cooking); and leave closed interior shades up a couple inches above the window sill to allow for air movement between the shades and the window.

  

  

Other Factors

Window Size: Larger windows may have a higher tendency to show condensation.

Window Location: Minor differences in conditions can cause condensation to form on one window and not another, even when they are side-by-side. Windows protected from the wind will have a higher tendency to show condensation.

Air Circulation: Good air circulation, such as exposure to wind, reduces the occurrence of condensation. Building projections, foliage and other wind-breaks may contribute to condensation.

Screens: Windows protected by exterior screens may have different condensation than the same windows without screens under the same conditions. Interior Shades: Opening interior shades or blinds may reduce condensation by allowing more heat to transfer to the outside.

Weather Changes: Condensation on windows can be a seasonal or a night-time event. When outside temperatures are warm, the glass temperature will usually be above the dew-point. The same is true during cold, winter months. Condensation will most often occur during transition months.

Moisture Between Panes: Moisture that builds up between the panes of glass may be due to a failed insulating unit, and if so it should be repaired.

 

 

Image
care and maintenance

Care & Maintenance Guide

Download our Care and Maintenance brochure to learn the best, and non-destructive, way to clean your Milgard windows and patio doors to keep them looking their best.

Image

"HOW TO" VIDEOS

If you like to learn by watching videos, we have a wide selection of "How To" product care videos for Milgard windows and patio doors with easy to follow instructions.